The LED aquatic products selection light manufacturer tells you that LED underwater lights are underwater lights produced with LED technology. Compared with traditional underwater lights, LED underwater lights are more energy-saving and environmentally friendly, and the lights are varied and more decorative, so they are widely used in various landscape lighting systems. However, as a manufacturer of LED lamps, some problems in the installation of LED underwater lamps need special attention.

1. The LED aquatic products selection light manufacturer tells you that the LED underwater light should be powered by a DC constant current power supply. Under the control of a constant current power supply, the forward voltage drop of the LED wall washer, LED flood light, LED underwater light, and LED buried light will decrease with the increase of LED chip temperature. Turning off the lights didn't make much of a difference. However, if it is driven by constant voltage, it will cause the chip of the LED underwater light to continuously increase the current as the temperature rises. In severe cases, the LED underwater light may even be burned. Therefore, the LED underwater light should be powered by a DC constant current power supply.
2. It is necessary to take anti-static measures. In the process of processing, production, and installation of LED underwater light products, certain anti-static measures should be adopted, such as the workbench should be grounded, workers should wear anti-static clothing, anti-static rings, anti-static gloves, etc. Install an anti-static ion fan.
The LED aquatic products selection light manufacturer tells you that at the same time, ensure that the air humidity when installing the underwater light is about 65%, so as to avoid the air being too dry and generating static electricity. In addition, LEDs of different quality grades have different antistatic abilities, and LED underwater lights with high quality grades to have stronger antistatic abilities.
3. Pay attention to the sealing of LED products. The LED aquatic products selection light manufacturer tells you that no matter what kind of LED lighting products, as long as they are used outdoors, they are faced with moisture-proof and sealing problems, especially for LED underwater lights. If the sealing problem is not handled properly, it will directly affect the service life of LED underwater light products.
The above information is the LED aquatic products selection light manufacturer's introduction and analysis of the installation precautions of LED aquatic light, hope it helps you.