The LED multifunctional germicidal lamp is a sterilization and disinfection device product equipped with an ultraviolet germicidal light source. It is widely used in the sterilization and disinfection of the surface of indoor objects and the air. It uses ultraviolet light with a wavelength of 185nm and (or) 254nm from an ultraviolet quartz lamp. Irradiation kills harmful microorganisms, and some products also produce a certain concentration of ozone to kill microorganisms. discount LED multifunctional germicidal light manufacturers should check whether the ultraviolet germicidal light source has identification information, read the instructions carefully, pay attention to the use method and safety precautions, otherwise it may bring safety hazards in use.

1. Check the product performance and check the identification information

First of all, you should check the identification label of the product, including the date of production, the name of the manufacturer, the address, the implementation standard and other information, the product manual and the certificate of conformity, etc. At the same time, you should check whether the light source of the discount LED multifunctional germicidal light manufacturers has identification information, such as Trademark, power, model, etc. To choose formal channels to buy UV germicidal lamp products, you should be especially careful when the price is too cheap.

Different LED line germicidal lamp products should be selected according to the place of use. The product specification generally describes the room type and room area to which the product is applicable.

2. Choose products with remote switch control

Using a product controlled by a remote control switch can turn on and off the ultraviolet germicidal lamp product at a certain distance away from the product, which is beneficial to further reduce the impact of ultraviolet radiation. Especially in the case where the product needs to be closed in advance, close operations may not be required to close the product.

3. Try to choose LED germicidal lamp products with human body induction function

For ultraviolet germicidal lamp products with human body sensing function, when people or animals enter the range of human body sensing (for example, 5m away from the product), the ultraviolet germicidal lamp products can be turned off during normal operation. This can effectively protect such people, especially the elderly and children, when someone accidentally enters the sterilization place.

Precautions for use after purchase

1. It is recommended to clean before use

If there is dust and impurities on the surface of the light source of the LED germicidal lamp, it will affect the sterilization effect. Please clean it before using it.

2. The instructions are very important

Read the instructions carefully, pay attention to the method of use and safety precautions, otherwise it may bring safety hazards during use.

3. Do not look directly at the ultraviolet light source

Direct exposure to strong ultraviolet light can cause eye burns or skin damage. Do not look directly at the ultraviolet light source when using it.

4. Ventilate before entering the room after use

When the LED germicidal lamp is working normally, it will produce a certain amount of ozone. To prevent the discomfort caused by the smell or ozone to the human body after the LED germicidal lamp is disinfected, it is recommended to use the ultraviolet germicidal lamp and the ventilation time is at least 30 minutes before opening the door into the room.