First of all, the sticker on the surface of the customized LED aquatic products selection light can be removed directly during the installation process. Calculate the size of the power supply based on the power and length of the customized LED aquatic products selection light. You can also buy a high-power switching power supply as the main power supply. The control distance of each controller is different, which can consolidate the waterproof effect of the connection point. If the connection point is long, it can be cut off.

Outdoor installation is the same as indoor installation, but attention should be paid to waterproofing. The customized LED aquatic products selection light must be installed according to the manufacturer's requirements when installing the customized LED aquatic products selection light. All input power sources should be connected in parallel (the wire size can be extended if it is not enough). The customized LED aquatic products selection light is a circuit structure composed of three LEDs in series and parallel. The control distance of the remote control is 15 to 20 meters. The installation is relatively simple. Use 3M glue to fix, safe and reliable, as for some places need to turn, or the length of the LED lights is inconsistent. Therefore, when installing customized LED aquatic products selection light, every three LEDs can be cut off once.

In summary, when the customized LED aquatic products selection light is used outdoors, it does not require rain and ultraviolet protection, so it is necessary to avoid the overload operation of the LED light pole. The advantage of this is that it can be controlled centrally. Not sure how to install. The control distance of the simple controller is 10 to 15 meters.

When the customized LED aquatic products selection light is used for interior decoration; we should also consider the configuration of the controller, the fixed installation position of the LED light bar, the required power, and the specific usage method.