The following article will tell you how to use multifunctional germicidal light correctly.

The precautions when using multifunctional germicidal light.
1. When using multifunctional germicidal light, people and animals and plants must be far away from the scene.

The precautions when using multifunctional germicidal light.
1. When using multifunctional germicidal light, people and animals and plants must be far away from the scene.
2. Do not stare at the multifunctional germicidal light for a long time. Ultraviolet rays have certain damage to human skin and mucous membranes. When using ultraviolet disinfection lamps, you should pay attention to protection. You must not look directly at the ultraviolet light source, otherwise, your eyes will be hurt.
3. When disinfecting items with multifunctional germicidal light, spread or hang the items to expand the irradiation surface, the effective distance is one meter, and the irradiation can be done for about 30 minutes.
4. When using multifunctional germicidal light, the environment should be kept clean, and there should be no dust and water mist in the air. When the indoor temperature is lower than 20 degrees Celsius or the relative humidity exceeds 50%, the irradiation time should be extended. After scrubbing the floor, wait for the floor to dry before sterilizing it with a UV lamp.
5. After using multifunctional germicidal light, remember to ventilate for 30 minutes before entering the room.

Through the above introduction and analysis of multifunctional germicidal light, hope it helps you.